Products  

Verotek Aesthetic™

  • Verotek Aesthetic

    Verotek Aesthetic represents a revolutionary advancement in solid zirconia material for anterior and posterior restorations. You can provide your patients with a restoration that compares to e.max in aesthetics, with nearly twice the strength! Verotek Aesthetic is a full-contour solid zirconia crown or bridge restoration with no porcelain overlay. It is glazed with a smooth wear-kind surface optimized for use in the aesthetic zone with natural translucency and internal color. Verotek Aesthetic crowns are precision-milled and sintered for 12 hours at 1450⁰ C for a homogenous structure that is significantly stronger than lithium disilicate.

    Advantages

    • Improved translucency and intrinsic color as compared to Bruxzir zirconia
    • Available for single units and 3-unit bridges that do not include molars
    • Flexural strength of 770 MPa – almost twice the strength of e.max
    • Biocompatible medical-grade zirconia
    • Monolithic structure makes the restoration nearly chip-proof
    • Fabricated using CAD/CAM technology for precision fit and marginal accuracy

    Cementing recommendations

    • Resin-reinforced glass ionomer cement: RelyX (3M ESPE), Fuji Plus (GC America)
    • Resin cements for short or over-tapered preparations: Unicem (3M ESPE)
    • Ceramir C & B (Doxa)

    Prep requirements

    • Slight chamfer margin preferred for best result
    • A more conservative preparation than is required for e.max
    • 1.25-mm of occlusal space is ideal

    Seating recommendations

    Research has shown that saliva contamination can inhibit the bond of solid zirconia and zirconia oxide copings. To successfully remove saliva, it is suggested that after try-in and before priming, the crown should be cleaned with Ivoclean, a zirconia oxide solution from Ivoclar-Vivadent.

        The suggested protocol is:

    1. Try the Verotek Aesthetic restoration in the patient’s mouth;
    2. Rinse saliva out of the restoration with water;
    3. Place Ivoclean in restoration for 20 seconds, rinse and dry;
    4. Apply primer and then cement with product of your choice.

    We can accept your digital intra-oral scans for Verotek Aesthetic restorations. Click here to learn more.

    Call for information on how to receive accurate Verotek restorations without a model for an efficient workflow that can save your practice time and money!


    ADA CODES

    • D2740 Crown - Porcelain/Ceramic Substrate
    • D6245 Pontic Porcelain/Ceramic
    • D6740 Abutment Crown Porcelain/Ceramic